5
If the electrode holder is installed in bypass (recommended option) i n s e r t a v a l v e t h a t
r e g u l a t e s t h e f l o w .
The following notes must be taken into consideration before definitively installing the system:
Flow direction must be respected (input / output).
The re-circulation system must guarantee the minimum flow indicated in the technical
SPECIFICATIONS TABLE for each model.
The float detector system is activated if there is no re-circulation (water flow through the cell,
or if that one is very low). If the electrolysis gas is not evacuated, a pouch will be
generated that electronically isolates it from the auxiliary electrode. Thus, when the
electrode is inserted into the electrode holder, the level probe (auxiliary electrode) must
be located on the upper part of the electrode older. The safest arrangement is
indicated in the recommended installation diagram (page 3).
Auxiliary electrode.
(Flow detection)
Output
Input
Water level
Summary of Contents for MAMNET ECO 15
