Tecnet TJ-3100, Service Manual

Page: 13 / 24

13
By Pressing UP (
▲
) or DOWN (
▼
) button, set Beep tone on or off. To exit from menu, press M
button or PTT button.
6.8.4 DTMF tone selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 4 times. Radio will go to DTMF setting mode. By pressing UP (
▲
) or DOWN
(
▼
) button, and pressing Enter( ) button, you can select 12 different DTMF tones.
To exit from menu, press M button or PTT button.
6.8.5 Call tone selection (10 different call tones):
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 5 times. Radio will go to Call tone selection mode. By pressing UP (
▲
) or
DOWN (
▼
) button, and pressing Enter ( ) button, you can select On or Off.
If you select On and press Enter ( ) button, you can select 10 different Call tones by pressing
UP (
▲
) or DOWN (
▼
) button. To confirm your setting, please Enter (Icon) button. To exit from
menu, Press M button or PTT button. To enable Call, press Call/Enter( ) button.
Reminder : To receive Call tone, the receiving radio needs to be on the same channel and tone
settings.
6.8.6 Roger Beep On/Off selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 6 times. Radio will go into Roger beep on/off setting mode.
By pressing UP (
▲
) or DOWN (
▼
) button will select on or off. To confirm your selection, press
Enter ( ) button.
To exit from menu, press M button or PTT switch.
6.8.7 Squelch level selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 7 times. Radio will goes into Squelch level selection mode.