This document contains information considered proprietary and confidential to Tecnar Automation Ltd
40101-00020-00– Rev 1.2
Revision date: 2017-07-31
Page 34 of 48
The Press the SELECTION/ENTER button and you will be prompted to fill the
new PROCEDURE NAME.
To change or add new characters in the new PROCEDURE name box,
simply bring the cursor to the desired location with the joystick and select the
desired digit or character. If you hold the joystick down or up, the selection
will increase the speed to achieve the desired character rapidly.
To delete a PROCEDURE, move the cursor to the desired PROCEDURE
that you want to delete. Then, move the cursor right and select the DELETE
PROCEDURE option. Press the SELECTION/ENTER button to delete. You
will see an X mark beside each PROCEDURE that you can delete except the
one that is currently in use (figure 29).
FIGURE 29 DELETE PROCEDURE