This document contains information considered proprietary and confidential to Tecnar Automation Ltd
40101-00020-00– Rev 1.2
Revision date: 2017-07-31
Page 31 of 48
To change or add new characters in the new welder’s name box, simply bring
the cursor to the desired location with the joystick and select the desired digit
or character. If you hold the joystick down or up, the characters will scroll
faster.
To delete a welder’s name, move the cursor over the desired welder’s name.
Then, move the cursor right and select DELETE WELDER. Press the
SELECTION/ENTER button to delete. You will see an X mark beside each
welder’s name that you can delete except the one that is currently in use
(figure 25).
FIGURE 25 DELETE WELDER
