FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following
two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
WEEE Compliance
DO not to dispose of product as unsorted municipal waste and to
collect such WEEE
separately, for proper treatment, recovery and recycling, please
take this product(s) to
designated collection points where it will be accepted free of charge.
Please contact your
local authority for further details of your nearest designated
collection station.
SAVE THESE INSTRUCTIONS
EN-12
EN-13
any equipment you intend to use in vicinity of the battery. Review
cautionary marking on these products and on engine.
k) PERSONAL PRECAUTIONS
1) Consider having someone close enough to come to your aid when
you work near a Li-ion battery.
2) Have plenty of fresh water and soap nearby in case the battery
electrolyte solution contacts skin, clothing, or eyes.
3) Wear complete eye protection and clothing protection. Avoid
touching eyes while working near battery.
4) If the battery electrolyte solution contacts skin or clothing, wash
immediately with soap and water. If the electrolyte enters eye,
immediately flood eye with running cold water for at least 10
minutes and get medical attention immediately.
5) NEVER smoke or allow a spark or flame in vicinity of battery or
engine.
6) Be extra cautious to reduce risk of dropping a metal tool onto
battery. It might spark or short-circuit battery or other electrical
parts that may cause explosion.
7) Remove personal metal items such as rings, bracelets, necklaces,
and watches when working with a Li-ion battery. A Li-ion battery
can produce a short-circuit current high enough to weld a ring or
the like to metal, causing a severe burn.
l) When charging the internal battery, work in a well ventilated area
and do not restrict ventilation in any way.
m) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
n) Do not expose a power pack to fire or excessive temperature.
Exposure to fire or temperature above 130°C may cause explosion.
The temperature of 130°C can be replaced by the temperature of
265°F.
o) Have servicing performed by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
product is maintained.
p) Attach output cables to a battery and chassis as indicated below.
Never allow the output clamps to touch one another.
1) Instructions shall include step by step directions for the proper
use of the booster function detailing the correct steps to connect
and disconnect the booster cables to the battery.
2) Each step shall be a different numbered item.
