Cell Specifications:
18650-3.7V-2000mAh (3 series and 7 parallels)
Battery Capacity:
42000mAh, 155.4Wh
Rated Capacity:
28000mAh/5V
3A, 140Wh
Static Power Consumption:
＜
1 mA
USB-PD Input/Output:
5V
3A, 9V
3A, 12V
3A, 15V
3A, 20V
2.25A, 45W Max
USB-A1/A2/A3 Output:
5V
2.4A, 9V
2A, 12V
1.5A, 18W Max
USB-A1+A2 Output (any two USB-A output at the same time):
5V
5A (Max)
USB-A1+A2+A3 Output (three USB-A output at the same time):
5V
5A (Max)
USB-A1+A2+A3+PD Output (three USB-A+PD output at the same time):
5V
5A (Max)
USB-A1/A2/A3+PD Output (any one of the USB-A+PD output at the same
time):
5V
5A (Max)
AC Socket Output:
110V 60Hz (pure sine wave)
Support resistive load 150W Max: incandescent light bulb, heating wire,
etc.;
Support inductive/capacitive loads 135W Max:
chargers, fans, AC
motors, hair dryers, hand drills, etc.
LED lighting:
power 1W, colour temperature 6500K
Power Adapter:
Input: 100-240V ~ 50/60Hz 1.5A Max
Output: 5V
3A, 9V
2A,12V
1.5A 18W Max
Colour: Black
Dimensions: 45 x 43 x 26mm
Weight: 50g
* Please use a charger with a power of 45W or above. If you use a charger
with lower power, the charging time will be extended.
1. DC output:
No need to press any button. Plug and Play. When a load
is detected, the display lights up and the product automatically
turns on.
2. Lighting:
Long press the On/Off Button to enter the constant light mode.
Short press the button once to enter the SOS mode.
Short press the button again to return to the constant light mode.
Long press the button to turn off the light.
3. AC output:
Connect the plug of your appliance to the AC socket. Turn
on the AC rocker switch and it can be used normally. After use,
please turn off the AC rocker switch and unplug the appliance in
time.
Tips:
1. The portable power station has a large capacity, and it takes 5-7 hours
to fully charge with a 45W PD power adapter. If you use the included
adapter, the charging time is about 12-13 hours.
2. If you find that the product cannot charge other devices, please check
whether the cable is good or damaged, or whether the charging
interface is firmly connected. If the cable is damaged, please use
another one that complies with safety regulations.
3. The portable power station has conversion efficiency, so the capacity of
the battery is not equal to the rechargeable capacity.
How to use
1. When the red dot on the lower left corner of the display is flashing, it
means the product is being charged. After fully charged, the red dot
stops flashing and goes out, and the number displays “100”.
2. The number displayed shows the current remaining power, for
example, 80 means the current remaining power is 80%.
3. Digital display status under load:
A. When using DC output, the number is always on, showing the
current remaining power.
B. When using AC output, the number is always on, showing the
current remaining power.
Display Status Indications
EN-04
EN-05
USB-C to USB-C Cable:
Length: 100cm
Colour: Black
Material: TPE
Portable Power Station Dimensions:
232 x 81 x 81mm
Product Weight:
1730g
Case Material:
aluminum alloy + PC+ABS
Process:
Sandblasting and aluminum oxide
Product colour:
Grey
Handle material:
Brown plain weave coated first layer cowhide
Cooling fan speed:
8300 RPM
Cooling fan noise:
<65dB (10cm from the product)
4. How to charge the portable power station:
A. Use a power adapter that supports PD/QC and connect the
charging cable of the adapter to the PD port of the product; or
B. Use a car adapter that supports PD/QC and connect the charging
cable of the adapter to the PD port of the product.
