background image

Before first use, remove the device and all accessories and being careful with 
sharp accessories. 
• Clean the apparatus according to the instructions in "Cleaning and maintenance" 
paragraph. 
• Place the machine on a suitable flat, stable surface. 

 

USE 

• Unroll the power cord completely.  
• Check that the tension in force in the country where you are, corresponds to that 

indicated on the apparatus.  

• Connect the apparatus in a correct socket-outlet, (and connected to the ground if 

the unit is Class I), to avoid any danger.  

• Disconnect the power source cable before any operation of cleaning of 

maintenance and accessories assembly. 

• Never modify the appliance in anyway. 
 
• The device should not be left unattended when connected to the main power 

supply. 

• Place the bowl on the motor unit and turn it clockwise until it locks with a click. 
• Insert the cutting blade onto the central axis of the bowl. 

Note : The blades are very sharp, avoid any contact, because it is possible to hurt  

himself seriously. 

• Put food in the bowl 

Notes : Cut large pieces into cubes 1 to 2 cm apart. 

Do not chop hard foods such as coffee beans, ice cubes, spices or 

chocolate   

   - There is a risk of damaging the blade. 

• If the device is overloaded, remove some of the ingredients and perform the 

treatment several times. 

• Place the lid on the bowl, slide the tab clockwise into the groove of the motor unit 

until the mark on the cover aligns with the mark on the motor block. 

Notes : For security reasons, this device is equipped with a lock that will prevent it  

from functioning if the lid is removed. 
This unit will only work if the bowl tongue is correctly inserted into the slot  
of the engine block. 
Never start the device without the cover correctly positioned and locked. 

• Press and hold the On / Off / Pulse button for the desired time. 
• Release the push button to stop the chopper and wait for the blade to stop 

completely to open the lid. 

• Do not operate the chopper for more than 10 seconds continuously. 
• Allow to cool between uses. 
• Do not operate the chopper if the bowl is empty. 
• Carefully remove the cutting blade, holding it by the plastic support, 

 

Summary of Contents for THA-150












Reviews: