background image

 

 

Ensure that the power cord does not come into contact with 
hot parts of this unit. 

 

Make sure the appliance has cooled down before cleaning 
and storing it.   

 

The temperature of accessible surfaces may be very high 
when the appliance is operating. Never touch these parts, of 
apparatus, to avoid burning itself.   

 

Make sure the appliance never comes into contact with 
flammable materials, such as curtains, cloth, etc...& the 
power cord and plug do not come in contact with water.   

 

Before cleaning, always unplug the appliance from the power 
supply and let it cool down.   

 

This appliance is not intended to be operated by means of an 
external timer or separate remote-control system. 

 

Always remove the plug from the wall socket when the 
appliance is not in use. 

 

When using an extension lead always make sure that the 
entire cable is unwound from the reel. Use solely CE 
approved extension leads. Input power must be at least 16A, 
250V, 3000W. 

 

Incorrect operation and improper use can damage the 
appliance and cause injury to the user. 

 

This device, designed for home use, complies with standards 
relating to this type of product.   

 

The item must not be left unattended when it is connected to 
main supply. 

 

The item is not to be used, if it has been dropped or if there 
are visible signs of damage or if it is leaking. 

 

This appliance is only intended for household use. 
 

 
 
 

 

 

Summary of Contents for TAS-6005











Reviews: