background image

 

 
Before cleaning, always switch off the appliance, disconnect the apparatus and let 
it cool.   
Clean the outside of the apparatus with a sponge or slightly wet linen. (possibly 
with household product). Once dry, reattach it in the dust container. 
Never plunge the apparatus in water or all other liquid!   
Do not use abrasive cleaners, gritting, or metal brush or another cutting object. 
 
Notes:   Do not wash the filter in a washing machine and do not dry it with an   
 

electric dryer. 

 

Do not clean the outside of the vacuum cleaner with gasoline oil or any 

   

other liquid. 

 

Emptying the dust container 

Cleaning the filters 

 

  Detach the dust container from the device 

  Remove the plastic  foam filter from the 

tank (Fig 1).   

  Empty the tank and clean it 

  If necessary, remove the foam filter from its 

support for cleaning (fig 2). 

  Clean the foam under running water (possibly with 

household product), Rinse well and allow to let it 
dry before replacing in its housing for the next 
use. 

  Never use the vacuum cleaner without the filters. 

 

STORAGE 

 
-Ensure the unit is completely cool and dry. 
-Do not wrap the cord around the appliance, as this will cause damage. 
-Keep the appliance in a cool, dry place and out of reach from children. 
 

GUARANTEE 

 
Before being delivered, all our products are subjected to a rigorous control.   
This apparatus is guaranteed 24 months starting from the date of purchase by the 
consumer.   
The documents in proof of guarantee are:   

• The invoice and 

 

• The filled and stamped warrantee plate (located on side or bottom of the gift 

box). Without these documents in proof, no free replacement, nor no free repair, 
can be carried out.   

Summary of Contents for TAS-6005











Reviews: