6
FIRST USE
Before first use, remove the device and all accessories gently.
MOUNTING
Before mounting the device, check that it is not connected to the main power.
Insert the tube into the handle (if both parts are delivered disassembled)
Insert the bottom of the tube into the top of the vacuum cleaner and use the
supplied screw to secure the assembly.
Insert the bottom of the unit into the floor brush.
USE
• Unwind the power cord completely.
• Check that the voltage in the country where you are
, corresponds to the voltage
indicated on the device.
• Connect the appliance to a good electrical outl
et, (earthed if the appliance is
class I), to avoid any danger.
• Disconnect the power cable from the mains before any maintenance cleaning
and accessory fitting operation.
• Never modify the device.
• Set the On / Off switch (marked O / 1) to "1". The vac
uum works and is ready for
use.
• At the end of use,
press the same switch to "0".
• You can use it to also suck up water.
CLEANING AND MAINTENANCE
Before cleaning, always: switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
To remove the tube (if necessary),
remove the retaining screw (1),
and pull the tube upwards (2).
