TECHWOOD LED19AK13DVX, Operating Instructions Manual

Page: 11 / 57

English - 9 -
Switching On/Off
Switching the TV On
Connect the power cord to the 110-240V AC, 50/60Hz.
With power cord plug connected to the mains power
socket, the TV is in ‘ Standby ’ mode.
To switch the TV on from standby mode:
Press the “ ” button and the TV will switch to
standby mode. Then the standby LED lights up.
To switch on the TV from standby mode either:
a. Press the “ ” button, CH ^/ v or a numeric button
on the remote control.
b. Press the middle of the “ ” button on the TV.
By either method the TV will switch on.
Switching the TV Off
Press the “ ” button on the remote control or press
the standby “
” button, so the TV will switch to
standby mode.
To turn off the TV completely, remove the power
cord plug from the mains power socket.
Note : When the TV is switched to standby mode, standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the “language
selection” menu appears. The message “ Welcome
please select your language! ” is displayed in all
language options listed alphabetically.
Press the “ ” or “ ” button to highlight the required
language, press OK button to select. “First Time
Installation” appears. Use “ ” or “ ” button to set
the required country, and press “ ” button to select
Search Type.
Use “ ” or “ ” to set the desired search type. Available
search types are Digital and analog, digital only and
analog only.
When set, press “ ” to select Teletext Language. Use
“ ” or “ ” to select the desired Teletext Language.
Next, select
Scan Encrypted
and set as
Yes
if you
want to scan coded stations.
(*) IMPORTANT: When you select Country option
as France or Italy, you will be asked to set and
confirm a PIN number. Selected PIN number cannot
be 0000. Enter a PIN number and confirm it by
entering once more. Press OK button to continue.
If the two PIN numbers match, your master PIN
number will be set.
WARNING: When you are required to enter a PIN
number for any menu operation you should use
the PIN that you have previously defined during
the first time installation. If you have forgotten
the PIN number you have set during the first time
installation, you should use the master PIN code,
4725.
Press OK button on the remote control to continue and
the following message will be displayed on the screen.
You can activate Store mode option by using “ ” or “
” button. If Store Mode is selected, Store mode option
will be available in other settings menu and your TV’s
features will be illustrated on the top of the screen. A
confirmation screen will be displayed after selecting
the Store Mode. Select YES to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button on the remote control to continue and the
following message will be displayed on the screen...