TechVision PS8P2N8, Manual

Page: 10 / 117

Introduction DVR User Manual
Enter Confirm selection
USB
To connect external USB device like USB mouse or USB
flash
export and local upgrading by USB mobile device

Support auto recognition of the displayer’s resolution

You can click the right mouse button at any interface to go back to the upper interface

You can click the middle mouse button at any interface to go to the live view interface

The display language and video format of the DVR will not be changed and the system
logs will be reserved if you reset the DVR to factory default

Press and hold the right mouse button for 5 seconds in any interface to switch the output to
VGA and the DVR will display the video at the lowest resolution which the DVR supports
1.3 Front Panel Descriptions
The following descriptions are for reference only.
Type I:
Name Descriptions
REC When recording, the light is blue
Net When access to network , the light is blue
Power Power indicator, when connection , the light is blue
Fn No function temporarily
Type II:
Name Descriptions
Power Power Indicator, when connected, the light is blue
HDD The light turns blue when reading/writing HDD
Net The light turns blue when it is able to access the network
Backup The light turns blue when backing up files and data
Play The light turns blue when playing video
REC Power Indicator, when connected, the light is blue
AUDIO /+ 1. Adjust audio 2. Increase the value in setup
P.T.Z / - 1. Enter PTZ mode 2. Decrease the value in setup
MENU Enter Menu in live
INFO Check the information of the device
BACKUP Enter backup mode in live
SEARCH Enter search mode in live
Exit Exit the current interface
Manually record
Play/Pause
Speed down
Speed up
1-9 Input digital number and select camera
0/-- Input number 0, the number above 10
Direction Key Change direction
Multi-Screen Switch Change the screen mode