TechVision PS32E8N2, Manual

Page: 64 / 121

Playback & Backup DVR User Manual
58
Button Meaning
Next frame button. It works only when the forward playing is paused in single
screen mode.
Click to step backward 30s and click to step forward 30s.
Click it to show the water mark on the image; click to hide the water mark.
Event list/tag button. Click it to view the event record of
manual/schedule/sensor/ motion and the tag information.
Open/close POS information.
Backup button. Drag the mouse on the time scale to select the time periods and
cameras, and then click the button to back up the record.
Backup status button. Click it to view the backup status.
Back button. Click it to return.
Full screen motion button.
Draw rectangle. You can search the record of motion detection in the pre-defined
rectangular area.
Draw line. You can search the record of crossing the line after drawing the line.
Draw quadrilateral. You can search the record in this quadrilateral after drawing
it.
Smart playback settings. Click it to set smart playback.
Introduction of area
②
:
Button Meaning
Click it to go to record search interface; see 8.3 Record Search, Playback &
Backup for details.
Click it to go to live preview interface; see Chapter 5 Live Preview
Introduction for details.
Click on the playback window to show the tool bar as shown in area
③
; right click on the
window to show the menu list. The tool bar and menu list are introduced in the table below.
Button Menu List Meaning
-- Move tool. Click it to move the tool bar anywhere.
Enable Audio
Click it to enable audio. You can listen to the camera audio by
enabling audio.
Snap Click it to snap.
Zoom In
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Click to pause the record playing; click to play the
record. When the record is paused in forward playing mode, you
can click to view the previous frame and click to
view the next frame.