8
After modification is finished, WEB page will restart and go to new IP address.
4.3.2 Debug Device
Step 1. Plug device to power.
Step 2. In homepage, long press Settings for 6 seconds. Device pops up Password
Verification box.
Step 3. Enter project setup password which is 002236 by default.
Step 4. Press Net Set to connect VTH.
Wireless:
If the VTH supports WI-FI, you can select wireless connection.
1. Select Wireless, open WLAN, view available WI-FI. See Figure 4-4.
Figure 4-4
2. Select WI-FI you want to connect, and in pop-up WLAN connection window,
enter WI-FI password.
3. Press OK.
Now device interface shows
at the upper-right corner which means wireless
connection is successful.
Wired:
1. Select Wired. See Figure 4-5.
