28
Network Camera User Manual
4.5.2
Port
Go to Config
Network
Port. HTTP port, Data port and RTSP port can be set.
HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied.
HTTPs Port: Optional. The default HTTPs port is 443. It can be changed to any port which is
not occupied.
Data Port: The default data port is 9008. It can be changed to any port which is not occupied.
RTSP Port: The default port is 554. It can be changed to any port which is not occupied.
4.5.3
Server Configuration
This function is mainly used for connecting network video management system.
1. Check “Enable”.
2. Check the IP address and auto report port of the transfer media server in the ECMS/NVMS.
Then enable the auto report in the ECMS/NVMS when adding a new device. Next, input the
remaining information of the device in the ECMS/NVMS. After that, the system will auto
allot a device ID. Please check it in the ECMS/NVMS.
3. Input the above-mentioned server address, server port and device ID in the responding
boxes. Click “Save” button to save the settings.
4.5.4
DDNS Configuration
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config
Network
DDNS.
