18
Network Camera User Manual
To set up ROI
1. Check “Enable” and then click the “Draw Area” button.
2. Drag the mouse to set the ROI area.
3. Set the level.
4. Click the “Save” button to save the settings.
4.3
Alarm Configuration
4.3.1
Motion Detection
To set motion detection:
1. Go to Config
Alarm
Motion Detection to set motion detection alarm.
Check “Enable” check box to activate motion based alarms. If unchecked, the camera will not
send out any signals to trigger motion-based recording to the NVR or CMS, even if there is
motion in the video.
