Latch time:
you can set how long the buzzer will sound when object move is detected(10s,
60s);
Show Message:
You can set show message on the screen when motion alarm is detected.
Buzzer time:
you can set how long the buzzer will sound when motion is detected(off, 10s, 30s, 40s, 60s);
Send Email
：
Allows you set the alarm images is issued to a specified email.
Full screen Alarm:
The function is defaulted to “On". When the motion is detected, the
channel will be switched to the full screen mode.
Record Channel:
the record channel will be activated when the object move is detected.
Post Recording:
you can set how long alarm record will last when alarm ends (30s, 1
5minutes).
Copy:
allow you copy current channel parameters to any other channel or all channels.
5.2.6 Device
5.2.6.1 HDD Set
Click [Main menu
Device
When DVR is connected to a HDD, the system will automatically detect if HDD is
If the cable connected to HDD
If HDD need to be formatted, status will be shown as “no format”, o
“Normal”
NO:
indicate HDD no pre-seted by system.
Status:
：
It will be available only when HDD have been formatted.
Total Space –
Total size of the hard drive currently installed.
Free Space –
Total amount of free space available on the hard drive currently installed.
Useable Rec. Time –
Free space currently available in
Auto-overwrite –
When set to ENABLE the DVR will record over the oldest files on the hard drive. The
Picture 5-43
Picture5-45
18
you can set how long the buzzer will sound when object move is detected(10s,
You can set show message on the screen when motion alarm is detected.
you can set how long the buzzer will sound when motion is detected(off, 10s, 30s, 40s, 60s);
Allows you set the alarm images is issued to a specified email.
The function is defaulted to “On". When the motion is detected, the
channel will be switched to the full screen mode.
the record channel will be activated when the object move is detected.
you can set how long alarm record will last when alarm ends (30s, 1
allow you copy current channel parameters to any other channel or all channels.
HDD] to enter into the interface shown as Picture 5
a HDD, the system will automatically detect if HDD is
HDD is loosen or HDD is abnormal, HDD status will be shown as “No
If HDD need to be formatted, status will be shown as “no format”, otherwise, the HDD status will be shown as
seted by system.
available only when HDD have been formatted.
Total size of the hard drive currently installed.
Total amount of free space available on the hard drive currently installed.
Free space currently available in hours.
When set to ENABLE the DVR will record over the oldest files on the hard drive. The
The channel will be separated into a
(PAL/NTSC mode). When any object moves into the
motion detection area, and the area where the object
is located is displayed in red and motion detection
be triggered. In the semi-transparent area the motion
detection is not activated.
After configuring the above parameters, click <OK> to
save it.
45
Picture5
User Manual
you can set how long the buzzer will sound when object move is detected(10s, 30s, 40s,
You can set show message on the screen when motion alarm is detected.
you can set how long the buzzer will sound when motion is detected(off, 10s, 30s, 40s, 60s);
Allows you set the alarm images is issued to a specified email.
The function is defaulted to “On". When the motion is detected, the corresponding
the record channel will be activated when the object move is detected.
you can set how long alarm record will last when alarm ends (30s, 1minutes
，
2minutes
，
allow you copy current channel parameters to any other channel or all channels.
HDD] to enter into the interface shown as Picture 5-45.
a HDD, the system will automatically detect if HDD is normal or not;
HDD status will be shown as “No Disk”, or,
therwise, the HDD status will be shown as
Total amount of free space available on the hard drive currently installed.
When set to ENABLE the DVR will record over the oldest files on the hard drive. The
separated into a 44x36 grids
When any object moves into the
motion detection area, and the area where the object
and motion detection will
transparent area the motion
After configuring the above parameters, click <OK> to
Picture5-46
Summary of Contents for QV-3049
Page 1: ...User Manual...
