TECHVIEW QV-3049, User Manual

Page: 14 / 40

5.2.1.3 Privacy Zone
The function Allow you setup privacy zone
up to four privacy zones, and please follow below steps to set:
1. Select the area (Area 1 ~ Area 4);
2. Click [Setup] to adjust position of mask area;
3. After finishing position adjust, click right key
4. Click [Apply] to save the above setting.
5.2.2 Record set
5.2.2.1 Record parameters
5.2.2.2 Schedule
Picture 5-14
Picture 5-15
Picture 5-
10
The function Allow you setup privacy zone parameters according to Picture 5
up to four privacy zones, and please follow below steps to set:
(Area 1 ~ Area 4);
Click [Setup] to adjust position of mask area;
After finishing position adjust, click right key of mouse to return back [Privacy zone] interface;
Click [Apply] to save the above setting.
Click [Main Menu Record
the interface shown as Picture 5
[Channel] option allows you select one channel
desired.
To setup weekly schedules, tick
record status you want (Alarm, General, or No Record)
and then click on each box in the schedule time line that
you want this method to apply to. You can use the [Copy
– To] pull-down menus and Copy button to copy sett
from one day to another day or all days.
Click [Main menu Record
into the interface shown as
Channel:
allow you setup the channel you
desired.
Record:
allows you
status(Enable/Disable
Pack Duration:
indicates maximum continuous
record time (15, 30, 45 and 60 min).
Pre-record:
Motion detection
Pre-record function.
Picture 5
-12
User Manual
parameters according to Picture 5-12. Each channel could set
of mouse to return back [Privacy zone] interface;
Record Schedule] to enter into
the interface shown as Picture 5-15.
allows you select one channel you
schedules, tick-select the box of the
record status you want (Alarm, General, or No Record)
and then click on each box in the schedule time line that
you want this method to apply to. You can use the [Copy
down menus and Copy button to copy settings
from one day to another day or all days.
Record Record Para] to enter
into the interface shown as Picture 5-14.
allow you setup the channel you
allows you set up record
Enable/Disable) of each channel
indicates maximum continuous
record time (15, 30, 45 and 60 min).
Motion detectionrecord support
Picture 5-13