Initial operation
10
BA/ECB/GB/0505
©
4.2 Cleaning
The items to be cleaned must be covered completely in the
cleaning liquid.
Place the items in the bath with the contaminated side down.
Cleaning instructions
4.3
Placement of cleaning items
Caution!
Do not place the cleaning items directly on the bottom
of the transducer tank as this might lead to damages on the
unit.
Use suitable accessories:
Use the plastic cleaning basket for big items.
Suitable for dentures, braces and small items. For cleaning, fill
the beaker with a suitable cleaning chemical.
Insert the loaded dental beaker in the transducer tank which
must be filled with liquid up to approx. 50%. Add a few drops of
a cleaning chemical to the water in the transducer tank.
With the forceps the cleaned items can be taken out of the unit
or items can be held into the liquid for cleaning.
Cleaning basket
Dental beaker
Forceps
4.4
Start-up of the cleaning process
Do not reach inside the tank during ultrasonic operation!
Cell walls can be damaged by prolonged exposure to ultrasonic
activity.
For taking out the cleaning items switch off the unit or use the
forceps (included in delivery).
NOTE
Press the on/off key in the operating panel of the unit
(see also
section 3.7).
The unit starts a cleaning cycle which switches off
automatically after 7 minutes.
This process can be repeated as often as required.
After the cleaning process thoroughly rinse the cleaned items in
running water and wipe dry with a cloth.
Press on/off key.
After-treatment of
items: rinsing/drying
