TSR 2800-10C Hardware Installation Manual
- 12 -
6
DTR
It is used for connecting MODEM.
7
SG
The cable is used to connect the console port of TSR 2800-10C and the outside console
terminal device. One end of the cable is a RJ45 8-pin plug and the other end is a 9-hole plug
(DB9). The RJ45 plug is put into the socket of the console port on TSR 2800-10C. The console
cable is numbered as RLC0301.
Figure 3-3 RLC0301 inner line connection
3.3.2 Connecting Gigabit Ethernet Ports
TSR 2800-10C supports 8 10/100/1000M auto-adaptation Ethernet TX ports, 2 gigabit
Ethernet combo ports, UTP (RJ45) interface, and ACT, Link indicators. The 10/100/1000M
auto-adaptation Ethernet port can be connected to the UTP port of the router and then to HUB
through the twisted pair. The numbering order of the pins in the UTP port is the same as the
console port.
Figure 3-4 RJ-45 connector of the console port