Techpro NVR-PRE16M-P User Manual Download Page 93

Page: 93 / 193

User Manual of Network Video Recorder

Choose the record file in Export interface and click button

to check it.

The Player player.exe will be exported automatically during record file export.

Figure 7. 3

Checkup of Quick Export Result Using USB1-1

7.1.2

Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer) and SATA writer.

Backup using USB flash drives and USB HDDs

Steps:

Enter Export interface.

Menu>Export>Normal

Set search condition and click

Search

button to enter the search result interface.

Figure 7. 4

Normal Video Search for Backup

Select record files you want to back up.

Click

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

The size of the currently selected files is displayed in the lower-left corner of the window.

Summary of Contents for NVR-PRE16M-P


































































































































































































Search results

Summary of Contents for NVR-PRE16M-P

Reviews:

Related manuals for NVR-PRE16M-P

Brands by name

Popular brands

Techpro NVR-PRE16M-P, User Manual

Search results

Summary of Contents for NVR-PRE16M-P

Reviews:

Related manuals for NVR-PRE16M-P

Brands by name

Popular brands