Techpro NVR-PRE16M-P User Manual Download Page 102

Page: 102 / 193

User Manual of Network Video Recorder

103

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7. 21

USB Flash Drive Management

Management of USB writers and DVD-R/W

The DVD-R/W is not supported by certain series NVR.

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

Search

button to enter Search Result interface.

At least one channel shall be selected.

Figure 7. 22

Normal Video Search for Backup

Select record files you want to back up.

Click

Export All

button to export all the recording files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

At least one recording file shall be selected.

Summary of Contents for NVR-PRE16M-P


































































































































































































Search results

Summary of Contents for NVR-PRE16M-P

Reviews:

Related manuals for NVR-PRE16M-P

Brands by name

Popular brands

Techpro NVR-PRE16M-P, User Manual

Search results

Summary of Contents for NVR-PRE16M-P

Reviews:

Related manuals for NVR-PRE16M-P

Brands by name

Popular brands