Techpro NVR-PRE16M-P, User Manual

Page: 173 / 193

User Manual of Network Video Recorder
174
13.4 Managing User Accounts
Purpose:
There is a default account in the NVR: Administrator . The Administrator user name is admin and the password is
12345 . The Administrator has the permission to add and delete user and configure user parameters.
13.4.1 Adding a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
Figure 13. 4
User Management Interface
2. Click the Add button to enter the Add User interface.
Figure 13. 5
Add User Menu
3. Enter the information for new user, including User Name , Password , Level and
User’s MAC Address
.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User’s MAC Address:
The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new user
will be displayed on the list, as shown in Figure 13. 6.