6
．
Servos
and
its
connecting bar
Use a dab of foam-friendly thick C/A to secure
them into place.Because the size of servos
differs, you may need to cut the servo mounting
hole larger to fit your particular servos.
aileron
servo
rudder
servo
elevator
servo
－
4
－
Secure one piece of wire to one end of the carbon fiber
rod, using onepiece of heat-shrink material. The piece
of wire should overlap the carbonfiber rod at least 1"
(25mm). Heat the heat-shrink material with a heat gun
to shrink it into place.PRO TIP For extra security, apply
a few drops of foam-friendly thin C/Ato the end of the
pushrod and allow it to "wick" into the joint.
Fixed on the fuselage side board
with
．
some foam-friendly C/A
Plywood Pushrod
Supports
