Technoton MasterCAN DAC15 Operation Manual Download Page 3

Page: 3 / 63

Terms and Definitions

MasterCAN DAC J1939 i/o modules. Operation manual. Version 2.0

Technoton, 2018

Revision history

Version

Date

Editor

Description of changes

1.0

08.2016

Basic version.

1.1

05.2017

The information added:

•

using MasterCAN DAC15 as converter of
analog/frequency signal of a Vehicle standard fuel level
sensor into messages of CAN-bus;

•

load current of analog inputs/outputs;

•

maximum load impedance of the analog output;

•

connection diagrams for D2+ discrete output.

2.0

12.2018

•

The new model of MasterCAN DAC2113 J1939 i/o
module is added.

•

Changes in MasterCAN DAC15 delivery set are reflected.

•

A new functional feature of MasterCAN DAC15 added
(conversion of SPN into pulse signal).

•

The document terminology is updated
(

S6 Technology

and

IoT Burger Technology

•

The structure of the document external links is added.

Summary of Contents for MasterCAN DAC15
































































Search results

Summary of Contents for MasterCAN DAC15

Reviews:

Technoton MasterCAN DAC15, Operation Manual, Page: 3 / 63

Search results

Summary of Contents for MasterCAN DAC15

Reviews: