8
2.2. Rear Panel
1. LNB 1 IN : 1st satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before
connecting.
2. Loop 1 OUT : Loop - through output of LNB1 IN for another satellite receiver. turn OFF the receiver to
watch an analogue program.
3. LNB 2 IN : 2nd satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before
connecting.
4. Modem : Connect to a telephone line.
5. S/PDIF : Connect with an appropriate optical cable to your HiFi system.
6. HDMI : Connect to TV using a HDMI cable for both audio and video signals.
7. Ethernet : Communication port via HTTP, FTP, NFS, Telnet and Samba to access your Hard Drive or
to upload channel lists. This is also used to update TM-Twin-OE's software.
8. 2x USB : Connect to the External HDD or USB storage with USB cable (Max. 500mA).
9. RF OUT : Connect to TV or VCR.
10. Antenna IN : TV Antenna connection
11. Video Output : Connect to TV using RCA cable.
12. Audio Output : Connect to TV using RCA cable.
13. Component (YPbPr) : Connect to TV using Component cable.
14. Scart (TV/VCR) : Scart Cable to TV/VCR(AUX) connection (RGB,CVBS, YPbPr).
15. RS232 : RS232 data port is provided.
16. Power Switch : Turn AC Power On/Off.
17. Power Inlet : Connect the detachable power cord.
Summary of Contents for TM-Twin-OE
Page 23: ...23 6 1 Menu Map ...