11
3.1. Connecting your TV to the receiver
● There are various types of connections of the digital receiver, but please consider to follow the order
below if available for the best possible picture quality.
1. HDMI connector
2. Component(Y, Pb, Pr) connectors
3. SCART connector (RGB, YC, CVBS)
Please select RGB for the SCART TV item in the Audio, Video menu, if your TV supports this mode
because it is more clear than YC or CVBS.
● Using A HDMI Cable : If you have a HD television set, you should use a HDMI cable for the best
results. Plug receiver’s HDMI cable to the terminal marked “HDMI” on the rear panel of your receiver and
its other end to the TV HDMI input. In this case, you do not have to make audio connection because the
HDMI connector can output stereo audio or Dolby Digital audio.
● Using Component video cable : Plug the component video cable (RCA video cable) into the
appropriate RCA jacks on your receiver : Y (green), Pb (blue), Pr (red) according to the color of both sets.
3. Connecting TV, Audio, and Antenna
Summary of Contents for TM-Twin-OE
Page 23: ...23 6 1 Menu Map ...
