12
● Using A SCART Cable : Plug the SCART Cable into the TV SCART outlet on your receiver : then
connect end to your TV.
3.2. Connecting your Hi-Fi audio to the receiver (optional)
● Connect RCA audio cable to the appropriate RCA input terminal of your external audio system and
connect the other end to the RCA audio port on your receiver.
● If you have digital audio equipment, you can connect it to Receiver using S/PDIF.
- Plug in the appropriate cable to the S/PDIF port on your Receiver, then connect the other end to your
digital audio equipment.
3.3. Connecting your dish antenna to the receiver
● This receiver has two tuners inside and there are two LNB inputs and one loop-through output of the
LNB1 IN.
● Please connect the appropriate satellite input to the LNB1 IN and/or LNB2 IN. The connection should
be matched in the Antenna Connection menu later.
● Please ensure that there is a connection to both the LNB1 IN and LNB2 IN connectors on your receiver,
so that both tuners work properly. You don’t need to use a loop cable from the LNB1 OUT to the LNB2 IN
connector because it will be connected internally according to the mode in the Antenna Connection menu.
● If you want to use another satellite receiver, please connect the LNB input of the receiver to the LNB1
OUT connector of this receiver.
Summary of Contents for TM-Twin-OE
Page 23: ...23 6 1 Menu Map ...
