1062 User Guide.doc
1062
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time
without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does
not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology
Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or
the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part
of this document may be reproduced in any form without the written consent of the author.
Page 32 of 39
4.5 Using mToken
4.5.1 Introduction
mToken is a Terminal Emulation application for Pocket PC devices. It is
available for download from
http://www.choung.net/mToken
. A time limited
evaluation version is also available.
4.5.2 Installation
Connect to the Pocket PC device using ActiveSync and then run the mToken
install. This will deploy the application to the device.
4.5.3 Operation
Launch mToken and tap ‘Session>Direct COM Port’. Select the COM port
assigned during the Bluetooth connection setup and a baud rate of 57600 as
shown below:
Ensure that the Handscanner is powered on by pressing the yellow button and
tap ‘Connect’. The behaviour then depends on which Bluetooth manager is
used on the Pocket PC device.
