Mini-Line G198 operating manual
Page 10
TF-TECHNOLOGIES
LIMITED WARRANTY
The equipment was designed and manufactured with utmost care and in accordance with safety
regulations. Every item has been fully tested prior to delivery. TF-Technologies warrants its
products against defects in material and workmanship for a period of twenty-four (24) months from
date of shipment, and six (6) months for labour with specific exclusions as indicated below. For
instruments sold through authorized TF-Technologies representatives, the date of shipment will be
as of the transfer from representative to purchaser. During the applicable warranty period, TF-
Technologies obligation under this warranty shall be limited exclusively to the repair at no charge,
except for shipping to and from TF-Technologies workshop, of any equipment which may prove
defective under normal use and which TF-Technologies examination shall disclose to its satisfaction
to be thus defective. Normal use is defined for the purpose of this warranty as operation under
normal load, usage, and conditions with proper care and maintenance and competent supervision.
In no event shall TF-Technologies be held liable for damages, delays, or losses consequential,
incidental, or otherwise attributable to the failure of the equipment. TF-Technologies liability being
specifically limited to repair as stated hereinabove. This warranty is automatically initiated except
where modified by contractual or other written and signed agreement.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF,
AND THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, AND TF-TECHNOLOGIES NEITHER ASSUMES, NOR AUTHORIZES ANYONE TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE INSTRUMENT OR ANY PART
THAT HAS BEEN SUBJECTED TO DAMAGE BY ACCIDENT, NEGLIGENCE, ALTERATION, ABUSE,
MISUSE, OR SERVICE NOT AUTHORIZED IN WRITING BY TF-TECHNOLOGIES. SUCH DAMAGE TO
INCLUDE BUT NOT BE LIMITED TO BURNING OF CIRCUIT BOARDS FROM IMPROPER SOLDERING
TECHNIQUES AND DAMAGE TO THE INSTRUMENT DUE TO PURCHASER’S FAILURE TO PERFORM
MAINTENANCE AS OUTLINED IN THE AUTHORIZED OPERATOR’S MANUAL. This warranty excludes
damage incurred in shipment. If the equipment is received in damaged condition, the carrier should
be contacted immediately. All claims for damage in transit should be filled with the carrier. If
requested, TF-Technologies will aid in filing of claims and/or locating products lost in transit
TF-TECHNOLOGIES
Kratbjerg 214
DK-3480 Fredensborg
Denmark
NOTICE TO CUSTOMERS
Any disclaimer or limitation on the remedies expressed above shall not be effective to the extent
prohibited by European law.
