GB 3
The temperature trend indicators are shown next to the indoor and outdoor temperature readings.
MIN/MAX INDOOR AND OUTDOOR TEMPERATURES
Simply press the
SELECT
button to view the maximum indoor and outdoor temperatures.
Then press the
SELECT
button again to view the minimum indoor and outdoor temperatures.
Then press the
SELECT
button again to return to current indoor and outdoor temperature display.
Reset MIN/MAX temperatures
While displaying the MAX or MIN temperatures, press the
SET/RESET
button to reset all maximum and minimum temperatures.
Note:
daily at 0:00 o'clock the MIN/MAX measuring values are reset automatically.
LOW BATTERY INDICATOR
When the low battery icon
appears in the indoor temperature section, the batteries in the temperature station need to be
replaced.
When the low battery icon
appears in the outdoor temperature section, the batteries in the outdoor transmitter need to be
replaced.
Note:
When the batteries in the temperature station will changed, time and calendar will reset to default setting.
TROUBLE SHOOTING
In case the temperature station shows false time, it maybe affected by electrostatic discharge or interferences from other devices.
Press and hold the
SET/RESET
button
for 2 seconds. The temperature station will start to receive radio controlled time signal again.
LOSS OF OUTSIDE TEMPERATURE DISPLAY
When the outdoor temperature digits show “--“, the wireless transmission is either interrupted or lost. Press the
TX
button
located
into the battery compartment of the outdoor sensor and thereafter the
SNOOZE/CH/REGISTER
button at the temperature station. If
you continue to lose the outdoor temperature display, try placing the outdoor sensor at a different location until you have smooth
transmission of temperature data.
Note:
Keep in mind that the outdoor sensor only has a 30 meter transmission range in open area with no obstructions. Each
obstruction between the outdoor sensor and the temperature station (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut
the transmission range in half.
Hereby, Technotrade declares that these products WS 9767 and TX960 are in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The original EU declaration of conformity may be found at:
www.technoline.de/doc/4029665097671
SPECIFICATIONS
Dimensions:
Temperature station:
65 x 45 x 165mm
Outdoor sensor:
40 x 22 x 100mm
Power requirements:
Temperature station:
2 x AA Mignon R06, 1.5V (not included)
Outdoor sensor:
2 x AAA Micro R03, 1.5V (not included)
Operation temperature:
0°C to +45°C (32°F to 113°F)
Temperature measuring range:
Indoor:
0°C to +50°C (32°F to 122°F)
(display shows HH.H / LL.L if out of this range)
Outdoor:
-40°C to +60°C (-40 to 140°F)
