27
TO ENTER AND SET THE TIMER
1.
Press the
TIMER / MEMO / SNZ
key. Default setting "0:00“.
2.
Set the timer with the
SET / MIN
keys for the minutes, and the
+ / SEC
keys for the seconds.
If the
+ / SEC
or the
SET / MIN
key is held, the seconds or the minutes will increase by 2.
TO START / STOP THE TIMER COUNDOWN
1.
After the timer has been set, press the
ALARM / START / STOP
key to start the countdown.
2.
Press the
ALARM / START / STOP
key to stop the countdown anytime.
3.
When the countdown reach "0:00“, an alarm sound will be heard. It will keep ringing for 30
seconds. The timer will also starts counting up. Press any key to stop the count up.
Note:
•
If the count up is stopped while the alarm is ringing, the LCD will show the timer set time.
•
If the count up is stopped after the alarm finished ringing (after 30s), the timer will show the
stop time.
TO RESET THE TIMER
Press and hold the
SET / MIN
and the
+ / SEC
keys
at the same time
to reset the timer to "0:00“
MULTIPLE TIMER SETTINGS
A maximum of 8 timers countdown can be stored and recalled.
To set multiple timer:
1.
Press the
TIMER / MEMO / SNZ
key to enter the timer setting mode.
2.
Set the timer with the
SET / MIN
(minutes) and
+ / SEC
(seconds) keys.
3.
Press the
ALARM / START / STOP
key to record the timer.
4.
Press again the
ALARM / START / STOP
key to stop the countdown and set a new time.
5.
Use the
SET / MIN
and
+ / SEC
keys respectively to set a new time.
6.
Keep repeating the same steps from 2 - 4 for additional setting of the timer.
