23
MANUAL SETTINGS
Note:
If the timer wall clock has already successfully received the DCF time signal and displays
the correct time and date, then the Manual settings can be skipped
.
After completion of the above described procedures in “
Setting up
”, the manual setting modes can
be entered by pressing the
SET / MIN
key. The following settings can now be programmed:
•
12/24 time format setting
•
Manual time setting
•
Year setting
•
Month setting
•
Day setting
•
ºC or ºF temperature setting
•
Language display setting
12/24 HOURS TIME FORMAT SETTING
1.
The
“12”
or
“24”
will start flashing in LCD1 (Default setting 24h). Select the desired time
display mode by use of the
+ / SEC
key.
2.
Press and release the
SET / MIN
key to enter the “
Manual time setting
“.
MANUAL TIME SETTING
In case the timer wall clock is not able to detect the DCF-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
1.
The hour digits will start flashing on LCD1.
2.
Set the desired hours by pressing and releasing the
+ / SEC
key followed by pressing the
SET / MIN
key.
3.
Now the minute digits will start flashing. Set the desired minutes by pressing and releasing
the
+ / SEC
key . If the
+ / SEC
key is held, the units will increase by 5.
4.
Press and release the
SET / MIN
key to move to the “
Year Setting
”.
