25
LANGUAGE SETTING
The weekday can be displayed in LCD2 with the pre-set languages: German (d), US English (US),
French (F), and Spanish (E). (Default language: German):
1.
Set the desired language for the weekday display in LCD1 by use of the
+ / SEC
key.
2.
Press and release the
SET / MIN
key to exit the setting mode and switch back to the normal
display mode.
EXIT THE MANUAL SETTING MODES
•
To return to the normal display mode from anywhere in manual setting mode, simply press
the
TIMER / MEMO / SNZ
key anytime.
•
If no keys are pressed for about 15 seconds in setting mode, the timer wall clock will
automatically switch back to normal display mode.
TIME ALARM SETTING
To enter into the time alarm setting mode:
1.
Hold the
ALARM / START / STOP
key for 2 seconds. The hour digits start flashing.
2.
Press the
SET /MIN
key to set the hour.
3.
Press the
ALARM / START / STOP
key to set the minutes. The minute digits start flashing.
4.
Press and release the
+ / SEC
key to set the minutes. If the
+ / SEC
key is held, the unit will
increase by 5.
5.
Press again the
ALARM / START / STOP
key to exit the alarm setting mode or wait for 15
seconds automatic timeout.
Note:
The alarm duration is 90 seconds. To stop the alarm, press any key,
except
the
TIMER / MEMO /
SNZ
key.
The time alarm can only be set if the LCD is in normal mode (not in timer mode).
