MINIMUM AND MAXIMUM OUTDOOR TEMPERATURE READING:
By pressing the “MIN/MAX” key the current outdoor temperature will alternate between the maximum, minimum and
current temperature recordings. Once a new outdoor temperature high or low is reached, it will automatically be set
into the Weather Station’s memory.
Note:
When current temperature is selected, the MAX or MIN icon will not appear on the MAX/MIN section of the LCD.
RESETTING THE MINIMUM AND MAXIMUM TEMPERATURE RECORDING:
By pressing and holding down the “MIN/MAX” key for about 3 seconds, both the indoor and outdoor minimum and
maximum temperature recordings will be reset to the current indoor and outdoor temperatures.
Important Note:
All the outdoor temperature recordings (max/min in all existing channels) will be reset at the same time.
OUTDOOR TEMPERATURE 1, 2, AND 3
If the more than one transmitter is being used, to alternate between the temperature readings of transmitter 1, 2, and
3, simply press the “CH” key. If the reading is from transmitter 1, then the channel identification number 1 will be
displayed in the outdoor temperature section of the LCD. The same will apply to the next transmitter and so on.
However, if only one transmitter is used, no identification number will be displayed on the LCD.
THE WEATHER FORECASTING ICONS:
There are 3 weather icons on the first section of the LCD, which can be displayed in any of the following
combinations:
Sunny Cloudy with sunny intervals Rainy
For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the
change in weather. If the icons do not change, then it means either the air pressure has not changed or the change
has been too slow for the Weather Station to register. However, if the icon displayed is a sun or raining cloud, there
will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are
already at their extremes.
The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as
each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean
that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather
is expected to get worse but not necessarily rain.
Note:
After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow
sufficient time for the Weather Station to collect air pressure data at a constant altitude and therefore result in a more
accurate forecast.
Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is
estimated to have an accuracy level of about 75% due to the varying areas the Weather Station has been designed
for use in. In areas that experience sudden changes in weather (for example from sunny to rain), the Weather Station
will be more accurate compared to use in areas where the weather is stagnant most of the time (for example mostly
sunny).
If the Weather Station is moved to another location significantly higher or lower than its initial standing point (for
example from the ground floor to the first floor of a house), remove the batteries and re-insert them after about 30
seconds. By doing this, the Weather Station will not mistake the new location as being a possible change in air-
