TKLS • USER MANUAL
24
TechnoKom © 2014
For more information on the TKLS Configuration Tool see “TKLS Configuration Tool” help file.
i
NOTE
The TKLS Configuration Tool provides configuration of the sensor via RS-485 bus and
support transmission of settings remotely via server. Remote configuration is loaded in TKLS
via AutoGRAPH fleet management device which the sensor is connected to.
Also the sensor supports remote configuration via Bluetooth.
Driver Installation
This section covers an installation procedure of the TKLS driver. For proper operation the
AGUSB Driver must be installed before the sensor connection to a PC. This driver can be
downloaded for free from the official website of TechnoKom. The AGUSB Driver is compatible
with MS Windows 7, 8, Server 2003, Server 2008 (x86 и x64).
To install the driver:
• Connect the sensor to a PC.
• The system will automatically search for a new equipment.
• If the Internet connection is available, the TKLS driver will be automatically downloaded
from Windows Update server and installed. If the Internet connection is not available,
continue with the procedure outlined below.
•
Download the archived drivers folder from the official website of TechnoKom and extract
files to a temporary directory on a hard driver.
•
Launch the driver update wizard and select “Browse my computer for driver software” to
search for the drivers manually.
• Install the driver. When the drivers is installed the system will automatically identify
connected device. The sensor is ready to operate with configuration and troubleshooting
applications.