Technogym Wellness Expert, Service Maintenance Manual

Page: 42 / 64

New Wellness Expert: Service & Maintenance manual - rev. 1.1
Page 7.4
Figure 7.2-4
LCD inverter:
1. Back off the 2 screws
g , using a small Philips
screwdriver.
2. Unplug the 3 connectors indicated in the
right side of the picture at side.
3. Back off the 2 screws h , using a small Philips
screwdriver.
5. Remove the LCD inverter.
Figure 7.2-5
Touch screen interface board:
1. Unplug the cables
i indicated in the figure,
coming from the touch screen and CPU
respectively.
2. Back off the screws l using a small Phillips
screwdriver.
3. Remove the touch screen interface board
from the display.
Figure 7.2-6
Main board:
1. Unplug the 4 connectors indicated in the
picture at side.
2. Back off the 8 screws m using a small
Phillips screwdriver.
3. Slowly pull out the circuit board and unplug
the fan cable connector n , as illustrated in the
figure at left.
Continued on following page
→