Technogym Synchro Excite 500, Service Maintenance Manual

Page: 153 / 202

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Page 9.13
9.3. USER MENU CONFIGURATION FOR 700 WTV MODELS
The machine configuration procedure is invoked, when the machine is in standby mode, by pressing
the top right hand, the bottom left hand and the bottom right hand corner in sequence, as shown in
the picture below.
The machine display will shows a window from where you can access the different configuration
menus, using the proper password.
To access the menu, type in the password
2406
and press
ENTER
key to confirm or
BACK
key to
back forward.
At this point the machine display will shows the different parameters of the menu, collected in
different pages, which can be scrolled with the
FORWARD
and
BACK
keys.
To exit the configuration press
HOME
key.
Pressing “HOME” in any page, all changes made up to that moment are saved; you cannot exit
without saving. In case of errors the initial Technogym settings can be restored using the
“DEFAULT CONFIG.” parameter.