Technogym Step 500i, Service Maintenance Manual

Page: 170 / 182

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.30
9.5.1.2. Automatic radio channel tuning procedure
1. Press the START button underneath the “AUTOMATIC SEARCH”
label to initiate automatic scanning of the FM radio band (88 – 108
MHz). During this stage, the channels found will be collected in a
temporary listing.
2. The "WAIT..." message appears along the top of the display.
3. Wait for the automatic search to finish, or interrupt it by pressing the
STOP key.
4. Use + and - buttons to select the desired channel (the display shows
the frequency) out of those found during the automatic search. The
selected radio station can be heard on the headphones.
5. Press ENTER to confirm the choice.
6. Use the < and > keys to select the number to assign to the channel.
7. Press ENTER to confirm the choice.
8. Repeat the above steps for each desired channel.
9. Before exiting the tuning menu, press the "SAVE" key. Press ENTER
to confirm, or cancel by pressing the CLEAR key.
10. Press the STOP button underneath the "MANUAL SETTING" label
to exit this tuning mode.
11. Exit with the "EXIT" key.