Technogym Step 500i, Service Maintenance Manual

Page: 150 / 182

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.10
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 15 minutes.
9.2.9. D
EFAULT CALORIES
It is possible to set the default calories for an exercise session, with a value ranging from 10 to 999.
To change the setting, when the display shows the current value:
DEFAULT CALORIES xxx
Press the ENTER key to modify the value: The current parameter value starts to blink on the
display; use the
↑
and
↓
keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 300.
9.2.10. D
EFAULT DISTANCE
It is possible to set the default distance for an exercise session, with values ranging from 1 to 999.
To change the setting, when the display shows the current value:
DEFAULT DISTANCE KM xxx
Press the ENTER key to modify the value: The current parameter value starts to blink on the
display; use the
↑
and
↓
keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 10.
9.2.11. M
ODIFIABLE TARGET FREQUENCIES
It is possible to enable or disable modification of the target heart rate during a constant heart rate
exercise. To change the selection, when the display shows the current setting:
HR : xxx
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
HR
MODIFIABLE
<default>
NON MODIFIABLE
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.