carried out by Fabrizio Frattini
Approved by Andrea Borghesi
revision 1/1
12
10/11/2011
TO FIX THE MACHINE TO THE GROUND
To FIX the equipment to the ground, proceed in the same way on both sides of the equipment:
fasten clamps M with screws C with nuts and washers (bolts and nuts are preassembled on the
frame).
Mark on the floor the point where to drill the two holes. Drill the floor. Insert the anchoring
bolts into the holes of clamps M.
ATTENTION: use an anchor bolt with minimum guaranteed weight 50kg
