background image

3

Group Cycle

Important safety instructions

You should always consult with a qualified and licensed medical professional or healthcare practitioner before starting any nutritional, diet, stretching or 
exercise program. You are advised to investigate and inform yourself about any health related actions and choices you make.
Please read all instructions before using Group Cycle. These instructions were written to ensure your safety and to protect the equipment.

The User Manual has been written in the manufacturer’s original language and translated into the language of the country in which the equipment is used. 
The user manual forms an integral part of the equipment, with which it should always be kept. The user manual should always accompany the equipment 
even in the event of relocation or sale. Technogym declines all responsibility for failure to pass on the user manual if the equipment is sold or relocated.

Do not allow unsupervised children close to the equipment.
Close supervision by qualified staff is necessary when Group Cycle is used by or near children, invalids or disabled persons.
Do not use the product in presence of small children or pets.
Use Group Cycle only for its intended use as described in the user manual. Only perform the exercises for which the equipment has been designed, following 
the instructions given in the manual. Any other use of the equipment is to be considered improper and therefore dangerous. 
Do not use attachments not recommended by Technogym.
Never operate the equipment if it is not working properly, if it has fallen or been damaged, or if it has fallen into water. In these circumstances, contact the 
Technogym Technical Support service.
Keep hands and feet away from moving parts. 
During use people must remain at a safe distance.
Completely assemble Group Cycle before using it. 
Check the product before each use. 
Assemble and operate the equipment on a solid, level surface. 
Do not put anything on the frame or on the display either, when present. 
Never drop or insert any object into any opening.

Summary of Contents for GROUP CYCLE
























Reviews: