14
F
E
H
A
B
C
C
D
G
C
Group Cycle
Adjusting the belt tension.
To adjust belt tension, proceed as follows:
- undo the screw (
A
) and remove the safety guard (
B
);
- undo the screw (
C
) and remove the safety guard (
D
);
- using a 5 mm hex wrench slacken the screws (
E
) and (
F
);
- using a 17 mm wrench slacken the lock nut (
G
) on the belt adjustment
screw (
H
);
- to tighten the belt, tighten the screw (
H
);
- to slacken the belt, slacken the screw (
H
);
- tighten the lock nut (
G
), and the screws (
E
) and (
F
);
- refit the safety guards (
B
) and (
D
).
Warning
Do not over-tighten the belt. Excessive tension on the belt
shortens its lifetime.
The correct tension of the belt is 94 ± 5 Hz.
Summary of Contents for GROUP CYCLE
Page 1: ...GROUP CYCLE User manual...
