Technogym Bike Forma, Service Maintenance Manual

Page: 78 / 94

BIKE FORMA: Service & Maintenance Manual - rev. 1.0
Page 9.6
9.1.14. R
ESETTING PARAMETERS TO DEFAULT VALUES
It is possible to reset the user menu parameters to their default values. To select the function, when
the LED matrix shows:
DEFAULT CONFIG.
Press
ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter. If the ENTER key is pressed the LED matrix will show:
CONFIRM ?
press
ENTER to confirm, or cancel by pressing the CLEAR key for a few seconds.
At the end of the configuration procedure, hold down the
CLEAR key for a few seconds to exit.
The CLEAR key can be pressed at any time to interrupt the procedure and revert to standby mode.
9.1.15. F
ORMAT
P&P
This function formats a TGS key for Plug&Play mode operation. To select the function, when the
LED matrix shows:
FORMAT P&P
press
ENTER to confirm. At the end of the format procedure, hold down the CLEAR key for a few
seconds to exit. The CLEAR key can be pressed at any time to interrupt the procedure and revert to
standby mode.