Page 32 of 52
THIS MANUAL IS THE PROPERTY OF
TECHNOGEL SpA
–
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
32
Remove the stirrer by extracting it from the control shaft .
Accurately clean the cage, the impeller and the stirrer rod, in and out
(using the supplied brush).
Dismantle the tank lid: open the lid by about 15 degrees and pull the lid
frontally to extract the pins from the hinges.
.
Dismantle the tap: loosen the locking ring nut and remove the complete
unit.
Loosen the piston ring nut and extract it .
Loosen the grip and remove it from
the tap body.
Extract the piston from the tap body
Remove the O-ring gasket from the
piston and from the tap body: make
sure not to damage these gaskets.
Replace them with the provided ones,
if necessary.
Any spare parts must be requested from the nearest assistance centre.