Page 28 of 52
THIS MANUAL IS THE PROPERTY OF
TECHNOGEL SpA
–
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
28
ATTENTION
It is strictly forbidden to tamper with or remove the plates.
The user is responsible for periodically checking the integrity of the plates and, where
required, replace the damaged ones with equivalent, eventually requesting them from the
manufacturer's assistance and spare parts service.
Danger of electrocution. Attention, disconnect voltage before opening
the door.
Dangerous temperature. Use adequate protections.
Tab. 4-3
5 - USER INSTRUCTIONS
5.1
COMMAND AND CONTROL DEVICES
The controls for enabling and managing the different work phases are arranged in the front part of the
machine. The controls and their use are described in chap. 4.
5.2
OPERATORS' TASKS
The tasks concerning the authorised operators refer to:
-
work cycle management by means of the controls on the machine body;
-
machine transport and handling;
-
machine maintenance such as cleaning, adjustments, lubrications and any repairs.
