41
DEVELOPMENT, MANUFACTURING AND SUPPLY OF INSTRUMENTATION
The.user.can.listen.synthesized.sound.through.the.built-in.sound.speaker..The.sound.tone.
pitch.changes.depending.on.the.signal.level..The.synthesized.sound.can.be.switched.on.in.the.
menu.
«Sound».
To
call.out
of.the.
menu
press
the.
button
«Enter»
To.enter.the.
mode.of.the.
parameter.
selection,.
press.the.
Enter.button
.
To.exit.the.
setting.of.the.
parameter,.
press.the.
the.button
«Enter»
Select.
the.icon.
«Sound».in.
the.window
Select
necessary
Parameter
11.2 «Hot» keys for work in the «Graph» mode with DODK and DKI
step-by-step.(by.2dB).decrease./.increase.coefficient.of.the.
amplification:.semi-automatic.of.suitable.gain.by.pressing.
“down”.button.for.1.second..
switching.off.the.«Graph».mode.
and.switching.to.the.Route.
mode.by.holding.the.button.for.
more.than.1.sec
..increase/decrease.of.the.
image.xl,.х2,.х4,х8.by.the.short.
pressing.of.the
.buttons:.....
This.part.of.the.screen.shows.the.advanced.
bottom.sensor.mode:
WB.-.Wide.Band.(F.up.to.8kHz)
Radio.-.F.more.than.8.kHz
To.switch.the.mode,.press.the.button:
User.can.hear.synthesized.sound.via.built-in.speaker..Sound.pitch.will.change..in.accordance.
with.signal.level..You.can.enable.this.feature.in.“Sound”.menu.
NOTE
In.the.mode.«Search.of.defects».using.the.external.sensor,.the.work.with.the.continues.and.
impulse.signal.is.supported..The.difference.is.in.that.the.digit.in.the.center.of.the.analogue..scale..
shows.not.the.current.value.of.the.signal,.but.the.maximum.value.(amplitude).of.the.transmissions.
of. the. interruptible. signal. from. the. transmitter.. Without. changing. the. gain. coefficient. (gain.
coefficient.should.be.the.same.as.in.the.place.of.maximum.signal).you.should.change.to.initial.
point.and.survey.the.area.of.maximum.signal.again..Try.to.find.local.maximums.(places.where.the.
signal.grows.then.decreases.and.grows.again)..Locate.the.main.maximum..
Summary of Contents for AG-309.15G
Page 1: ......
