TECHNO-MEDIA SAT-TV 40, User Manual, Page: 23 / 33

‘User Manual’’ Automatic Satellite Antennas TECHNO-MEDIA SRL
UMN_00094001 Rev 7
TECHNO-MEDIA SRL
Via IV Novembre 92 20021 Bollate (MI) tel. 02/48672988 - info@techno-media.it
23
USE of the System SAT-TV 40; 65; 80 with BEEP-BOX 2
Description of the system
Every system, use an automatic process to point the satellite which does not require
intervention by the user.
The system allow to point a satellite independently by the type or model of the Set Top
Box used and independently by the orientation and/or the inclination of the vehicle. Some
receiver like the pay per view ones, require longer time to lock the satellite signal, in this
case you need to change the type of the set top box using the programming approach
mentioned in the related paragraph. This type of receivers will make the scanning process
longer.
Remember that the Antenna can point the satellite ONLY if the Set Top
Box has at least one channel (of the pointed satellite) pre-programmed
on it.
System is designed to work with any Set Top Box. Anyway there are Set
Top Boxes like
SKY and/or PAY PER USE which require longer time to
lock the signal . For this reason, if your receiver is one of those, you need
to program the system to work with it selecting the SKY and/or PAY PER
USE mode.
To Select the SKY and/or PAY PER USE please refer to the paragraph
“Programming the Receiver Type”.
The GPS allow to point the satellite with the maximum accuracy.
The Tilt Sensor (if installed) will correct any possible vehicle inclination.
The pointing procedure is started as soon as the set top box is powered up and the power
is applied to the LNB. The time needed to start the process may change based on the Set
Top Box type.