EN8
Reset
If the clock shows an incorrect time or after changing the battery, press the
RESET button on the case back panel to re-start the alarm clock. The
hands (minute, hour) are adjusting again to 1
2 o’clock position and the
clock enters into signal reception mode. In successful signal reception the
time will be adjusted to the correct radio controlled time according to the
DCF-77 reception signal.
Precautions
x
This main unit is intended to be used only indoors.
x
Do not subject the unit to excessive force or shock.
Summary of Contents for WT 768
Page 48: ...ES13...
