F3S-TGR-SBx-KxC series User’s
manual
11
If several SLCs are used, care must be taken that each
SLC
does not
interfere with the ones nearby; please install as follows:
Mirror1 SLC1 SLC2 Mirror2
Install the SLC so that they emit in the opposite directions (Staggered)
SLC1 Mirror2 SLC1 Mirror1
Mirror2 SLC2
Mirror1 SLC2
All these installation will prevent mutual interference between SLC.
F3S-TGR-SBx-KxC series User’s
manual
12
Insert a non-transparent wall if it is not possible to connect the SLC as
shown previously.
SLC1 Mirror1 wall SLC2 Mirror2
SLC1
wall
SLC2
Mirror1
Mirror2
The two bars
must
be mounted symmetrically as shown in the picture:
Top
view
